LARGE DIAMETER MARINE HOSE

TIFT - Compoflex® Chemiflex®25 Marine Vapor Recovery Hose

U.S.Hose (formerly Senior Flexonics) TIFT- Compoflex® Chemiflex® 25 Marine Vapor Recovery Hoses are specifically designed for lightweight but durable handling in the recovery of vapors during marine transfer operations.

Chemiflex® 25 Code 944 assemblies are supplied with lightweight fixed or floating flanges with ANSI 150 drilling with two additional 5/8" diameter holes drilled in the bolt circle to conform to USCG regulations.

All factory fitted assemblies are fully painted and certified to USCG Regulations 33 CFR Section 154.810 Vapor Line Connections

• Available with galvanized steel inner and outer wires as standard with optional polypropylene or T316 stainless steel inner or outer wires.
• Standard version polypropylene lined is resistant with 100% aromatics, other liners such as PTFE Teflon® are available on request.
• Last one metre of hose at each end is marked red-yellow-red bands in accordance with USCG regulations with 2" high black "VAPOR" on stripe
• Full end-to-end electrical continuity with a resistance of less than 10 ohms
• Refer to our Compatibility Chart for specific recommendations.

Chemiflex 25 Marine Vapor Recovery Product Literature

HYDROCARBON-OIL HOSE

CHEMICAL TRANSFER HOSES

LARGE DIAMETER MARINE HOSE
TIFT - Compoflex® Heavy Duty Oilmaster® Marine Code 982

TIFT - Compoflex® Heavy Duty MTBE-Master Code 982/018

TIFT - Compoflex® Chemiflex®25 Marine Vapor Recovery Hose

TIFT - Compoflex® Heavy Duty Chemiflex® PG/PS Code 998 & SG/SS Code 969

TIFT - Compoflex® Heavy Duty Chemiflex® PG-F/PS-F Code 998 & SG-F/SS-F Code 969

TIFT - Compoflex® Heavy Duty Chemiflex® SG-Z/SS-Z Code 969/075

TIFT - Compoflex® Heavy Duty Special Chemiflex® SG/SS Code 977

CRYOGENIC COMPOSITE HOSE

END FITTINGS

ACCESSORIES

LNG HOSE